Gemstone Ornaments
General Instructions

These instructions are used for the entire series of gemstone ornaments:

Tracing the Shape or Line Design

  1. Place your canvas on top of the template making sure that design is centered and that the weave of the canvas is straight in relation to the drawn template.
  2. Use a fine line permanent marker to trace the shape. I use Micron brand Size 005 which produces a wonderfully fine and distinct line. These pens can be found in art supply stores. You can purchase them singly or in a pack of eight colors. I suggest you purchase the pack so that you can use a color that is somewhat close to your thread color. For example, the June ornament (Pearl) uses cream thread, so you would trace the shape with a yellow or orange pen. This eliminates any show-through of your markings.

Mounting the Canvas on Stretcher Bars

  1. Always mount the canvas on stretcher bars.
  2. Use staples or tacks to secure the canvas to the bars, beginning with a staple/tack in the center of each side. Pull on the canvas as you insert staples/tacks so that the canvas is taut.
  3. Canvas tends to stretch as it is stitched. If or when the canvas becomes loosened, be sure to retighten it on the stretcher bars.

Working with Threads

  1. 6-Strand Embroidery Thread
    1. Separate into individual strands.
    2. Use 3 to 4 individual strands on 18-count canvas (3 for diagonal stitches and 4 for straight stitches). Depending on your working tension and your familiarity with laying threads, you may need to add a strand to the number suggested.
    3. Use a laying tool to stroke or smooth the strands of thread. Each of the individual strands should lie straight and parallel to each other (not twisted). Click for more information about using a laying tool if you are not familiar with this stitching technique.
    4. Work with a length of thread no longer than 24".
  2. Metallic Threads
    1. Use relatively short lengths of thread.
    2. Be sure that your needle is the appropriate size for the thread. Needles that are too small will wear the thread at the needle eye.
  3. Ribbon Floss
    1. Use a laying tool so that there are no twists in the thread. Sometimes you may need to flip your canvas to the back side and remove the twist on the under side of a stitch.
  4. Silks
    1. Splendor, Au Ver a Soie Soie d'Alger, Soie Cristale, Needlepoint Silk, and overdyed or space dyed silks such as Silk n' Colors or Waterlilies are treated just like 6-Strand Embroidery Thread.
  5. Watercolours
    1. It's a good idea to not cut through the hank of thread. This allows you more control of the color variations of the thread. You can cut the thread so that your preferred colors occur in specified places or are more dominant in the area.
    2. Separate into individual strands (3 per full strand).
    3. Use just one individual strand.

Stitching/Outlining the Ornament Shape

Stitch two rows of continental (tent) stitch. Stitch one row all the way around, right on top of your drawn line. Stitch a second row, sharing canvas holes, outside the first row. These two rows of continental stitch serve several purposes. They provide a well-defined solid edge and a foundation of stitches for attaching the twisted cording when you are finishing the ornament. These stitches also establish the edge of the design so that you don't have to constantly make decisions when you are working compensation stitches along the edge of the design.

Working the Ornament Stitches

  1. Begin your stitching with a waste knot (the thread length is knotted with the knot on top of the canvas approximately one inch forward to your starting point). You will secure the thread with your first inch of stitching and will cut off the knot when you reach it.
  2. End your stitching length of thread by running through the stitches on the back side of the canvas. Do this either horizontally or vertically (not on the diagonal).
  3. Whenever possible, bring the needle up for a stitch in an empty canvas hole.
  4. When you are stitching in diagonal rows, always begin and end your thread either horizontally or vertically. Never place a waste knot or run your thread through the backs of stitches on the diagonal. Doing so may create diagonal ridges on the front of your work.

Copyright 1998-2003, National Academy of Needlearts. The contents of this page were expressly posted for individual viewing purposes on the Internet only. No part of this Web site may be published, reproduced, stored in, or introduced into a retrieval system, or transmitted in any form or by any means (including electronic, mechanical, photocopy) whatsoever without written permission from the above copyright holder.